StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA I/II/III and IDE (40 pin) SSD/HDD Docking Station, Hot-Swap Hard Drive Bays, Top-Loading

StarTech.com Dual-Bay USB 3.0 to SATA and IDE Hard Drive Docking Station, USB Hard Drive Dock, External 2.5/3.5" SATA I/II/III and IDE (40 pin) SSD/HDD Docking Station, Hot-Swap Hard Drive Bays, Top-Loading. Storage media type: HDD, SSD, Storage drive interface: Parallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III, Storage drive sizes supported: 2.5,3.5". Host interface: USB 3.2 Gen 1 (3.1 Gen 1) Type-B. Product colour: Black, Material: Plastic, Maximum data transfer rate: 5 Gbit/s. AC input voltage: 110-240 V, Input current: 1.3 A, Output voltage: 12 V. Width: 130 mm, Depth: 147 mm, Height: 70 mm
Manufacturer: StarTech
SKU: UNIDOCKU33
Vendor: Aspects
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDE

The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.

Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.

A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).

The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

The StarTech.com Advantage
  • Legal warranty via the seller
  • 30 days to change your mind — free returns
  • Free delivery from €25
€76.03 incl tax
increase decrease
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
External SSD/HDD Docking Station | USB 3.2 Gen 1 (5 Gbps) to SATA III and IDE

The UNIDOCKU33 USB 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE and SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray.

Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) and hybrid, drives with performance up to 70% faster than conventional USB 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details.

The slot-loading design holds the SATA and IDE drives upright inside the docks, neatly keeping them off the desk, for convenience and a clutter-free setup. For SATA drives, the HDD can be inserted and connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data and LP4 power connections, making it easy to connect to the dock using the included IDE data and power cables.

A single USB 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously - a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage and backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" and 2TB 2.5" drives).

The UNIDOCKU33 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Improved Performance with UASP

UASP is supported in Windows 8, Mac OSX (10.8 or above), and Linux. In testing, UASP performs with a 70% faster read speed and 40% faster write speed over traditional USB 3.0 at peak performance.

At the same peak in testing UASP also shows an 80% reduction in required processor resources.

Testing results were obtained using an Intel® Ivy Bridge system, a UASP-enabled StarTech.com Enclosure, and a SATA III solid state drive.

The StarTech.com Advantage
Products specifications
Features
Product colourBlack
MaterialPlastic
Maximum data transfer rate5 Gbit/s
Hot-swapYes
Plug and PlayYes
RAID supportNo
LED indicatorsActivity, Power
UASP supportYes
CertificationCE, FCC
Weight & dimensions
Width130 mm
Depth147 mm
Height70 mm
Weight500 g
Other features
ChipsetJMicron - JMS561U, JMD330
Mean time between failures (MTBF)30000 h
Compliance certificatesRoHS
Logistics data
Harmonized System (HS) code84733080
Master (outer) case width210 mm
Master (outer) case length625 mm
Master (outer) case height450 mm
Products per master (outer) case10 pc(s)
Packaging data
Package width123 mm
Package depth187 mm
Package height214 mm
Package weight1 kg
Operational conditions
Operating temperature (T-T)5 - 80 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)8 - 90%
Power
AC input voltage110-240 V
Input current1.3 A
Output voltage12 V
Output current3 A
Power plug typeType M
Ports & interfaces
Host interfaceUSB 3.2 Gen 1 (3.1 Gen 1) Type-B
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity1
DC-in jackYes
Packaging content
AC adapter includedYes
Cables includedUSB
ManualYes
Hard drive
Storage media typeHDD, SSD
Storage drive interfaceParallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported2.5,3.5"
Number of storage drives supported2
Maximum storage capacity6 TB
Cooling
Built-in fanNo
*
*
*
Products specifications
Features
Product colourBlack
MaterialPlastic
Maximum data transfer rate5 Gbit/s
Hot-swapYes
Plug and PlayYes
RAID supportNo
LED indicatorsActivity, Power
UASP supportYes
CertificationCE, FCC
Weight & dimensions
Width130 mm
Depth147 mm
Height70 mm
Weight500 g
Other features
ChipsetJMicron - JMS561U, JMD330
Mean time between failures (MTBF)30000 h
Compliance certificatesRoHS
Logistics data
Harmonized System (HS) code84733080
Master (outer) case width210 mm
Master (outer) case length625 mm
Master (outer) case height450 mm
Products per master (outer) case10 pc(s)
Packaging data
Package width123 mm
Package depth187 mm
Package height214 mm
Package weight1 kg
Operational conditions
Operating temperature (T-T)5 - 80 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)8 - 90%
Power
AC input voltage110-240 V
Input current1.3 A
Output voltage12 V
Output current3 A
Power plug typeType M
Ports & interfaces
Host interfaceUSB 3.2 Gen 1 (3.1 Gen 1) Type-B
USB 3.2 Gen 1 (3.1 Gen 1) ports quantity1
DC-in jackYes
Packaging content
AC adapter includedYes
Cables includedUSB
ManualYes
Hard drive
Storage media typeHDD, SSD
Storage drive interfaceParallel ATA (IDE), Serial ATA, Serial ATA II, Serial ATA III
Storage drive sizes supported2.5,3.5"
Number of storage drives supported2
Maximum storage capacity6 TB
Cooling
Built-in fanNo
Only registered users can write reviews
Transparency in Every Review
Negative, positive, or neutral – we publish every review. First, we check if it meets our guidelines and is genuine. We also verify whether it was written by someone who purchased the product via zondox.com. If not, or if it came from an external website, we mention it. Most checks are automated, though manual reviews are sometimes done. We do not pay for reviews.